____________________________________________________________________________________________________________ MODELMODEL 25002500
DOWNLOADING INSTRUCTIONS
The application software may be downloaded with the DANIEL program on the
application diskette, designated as IPL25. The IPL25 program, which is a new
window’s program, invokes the LOAD2500 program that can also be used directly.
Before attempting to download the application to the MODEL 2500, the user
should complete the following preliminary procedures:
- Activate both the PC and the MODEL 2500.
- Make certain the communications link between the PC and the Model
2500 is established. If necessary, refer to the Hardware Manual, Daniel
P/N 3-9000-590, for system wiring diagrams.
- Ensure that the MODEL 2500 has the proper communication ports and
baud rates installed and that a communications identification number
is designated.
- Make a working copy of the application diskette(s).
- Copy the application diskette(s) onto the hard drive, if the PC has a
hard drive installed.
_________________________________________________________
NOTE! Since diskette(s) wear out over time, file copies should
be made and stored in safe place.
_________________________________________________________
________________________________________________________________________________________________________________________________________
SECTIONSECTION 33
20
To Next Page
Loading...
Need help?
General