MODELMODEL 2500_______________________________________________________2500_______________________________________________________
INTRODUCTION
The DANIEL INDUSTRIES MODEL 2500 INSTRUMENTATION SYSTEM
MICROCOMPUTER is an advanced state-of-the-art, microprocessor-based
computer used to control and measure the numerous physical and dynamic
characteristics of fluids, such as liquids and gases. Compatible with most process
flowmeters and transmitters, the MODEL 2500 is a state-of-the-art instrument with
both a large input/output capacity and a powerful processor possessing the
programmable capabilities necessary for the hundreds of applications required for
a demanding environment.
The DANIEL INDUSTRIES MODEL 2500 software can be configured to:
- Perform a broad range of flow measurement and process applications
without compromising the exact needs of the application and without
the expense of a custom instrument.
- Monitor and read live transmitter inputs, both analog and digital.
- Produce multiple calculated outputs.
- Act as a controller for meter prover applications.
- Serve as a Remote Terminal Unit (RTU) furnishing calculated data on
demand to a "Host" computer or a Supervisory Control and Data
Acquisition (SCADA) system.
________________________________________________________________________________________________________________________________________
SECTIONSECTION 11
1
To Next Page
Loading...
Need help?
General