____________________________________________________________________________________________________________ MODELMODEL 25002500
PRTCLMAS PRTCLMAS lower level sub-menu provides for
displaying or changing the type of communications used
by any one of the serial ports, which is defined in the
portuse section as a MASTER (MODASCII or
MODRTU), with the default type being MODASCII.
RPTGAP RPTGAP lower level sub-menu provides for selecting
SPACES, FORMFEED, or ANSIHOME with SPACES,
with the latter being the default setting, and also with
providing spaces between report printouts, providing,
through FORMFEED, a formfeed command between
reports, and providing, through ANSIHOME, printing
reports with special control characters to permit reports to
be displayed on an ANSI-type terminal.
COMMWAIT COMMWAIT provides a delay (in tens of milliseconds)
between receiving a message and transmitting a response.
The COMMWAIT default value is 20 (200 milliseconds).
COMMWAIT2 (Two-board units only) COMMWAIT2 provides the same
function as COMMWAIT for two-board units.
ARCHIVE
The ARCHIVE sub-menu, which is the eleventh sub-menu on the MAIN MENU,
provides for data storage and retrieval similar to a file.
SYSTEM COMMANDS
The SYSTEM COMMANDS sub-menu, which is the twelfth sub-menu on the
MAIN MENU, has nine lower level sub-menus. They are:
DATE/TIME
PARAMETERS Sets the date and time
________________________________________________________________________________________________________________________________________
SECTIONSECTION 44
56
To Next Page
Loading...
Need help?
General