DANIEL 2500 User Manual

____________________________________________________________________________________________________________ MODELMODEL 25002500
PRINTING REPORTS FROM A COMPUTER USING MACROS
Using a communications package that supports macros, this request could be
entered as a macro. Depending on your hardware in use, refer to the information
on macros. For several communication packages the following table shows
equivalents.
STX = Start of text
LF = Line feed
CR = Carriage return
CODE
HEX
SHIFT6=^
CTRL B = ^B STX 02
LF = ^J LF 0A
CR = ^M CR 0D
An example of a request generated for a standard communication package is as
follows.
^B0010001^J^M
A line feed command (<LF>) is required if <LF> is not included in the <CR>
command of the computer or terminal.
________________________________________________________________________________________________________________________________________
SECTIONSECTION 77
124

DANIEL 2500 Specifications

General

Brand	DANIEL
Model	2500
Category	Computer Hardware
Language	English