DANIEL 2500 User Manual

____________________________________________________________________________________________________________ MODELMODEL 25002500
REPORT PRINTOUTS
Reports are normally printed on a serial printer connected to a RS-232 port on the
MODEL 2500.
A report printout can be initiated by using four different methods. They are:
- Automatically by including a report command statement on a
Calculation Entry Sheet in the configuration program
- Operator command from the front panel
- Remote terminal or computer attached to the REPORTS serial port
- MODBUS communications link
________________________________________________________________________________________________________________________________________
SECTIONSECTION 77
120

DANIEL 2500 Specifications

General

Brand	DANIEL
Model	2500
Category	Computer Hardware
Language	English