____________________________________________________________________________________________________________ MODELMODEL 25002500
LOWER-LEVEL SECURITY PASSWORD
If the security switch, which is located at the rear of CPU I/O board, is in the
center position, an operator must enter the lower-level security password before
entering or changing variable values in the system. The lower-level security
password remains active for five minutes after the last key is pressed. The system
command "Unit Lock" disables the unit password and the password must be entered
again in order to change data.
When the instrument is downloaded, the default lower-level password is eight 1s,
(11111111). Installing a new, user-originated, lower-level password at the initial
startup of the MODEL 2500 system, is recommended.
________________________________________________________________________________________________________________________________________
SECTIONSECTION 33
34
To Next Page
Loading...
Need help?
General