____________________________________________________________________________________________________________ MODELMODEL 25002500
ENTRY
EXPLANATION
-C-
CLEAR CLEAR provides for clearing totalizers. Two different
sets of selections are possible:
- CLEAR and IDLE
- YES and NO
CLEAR resets the totalizer, and IDLE maintains
cumulative totals on the totalizer.
YES resets the totalizer after printing a report, and NO
maintains cumulative totals on the totalizer.
CLEARALL CLEARALL provides for clearing all totalizers
(accumulators). The selections are NO, which does not
clear totalizers, and YES, which clears totalizers.
-I-
INTERVAL INTERVAL provides for selecting the frequency for
printing timed reports. Selections are identified by an
abbreviation of the time interval between report printouts.
In other words, HOUR1 (sometimes HOURX1) provides
for a 1 hour interval between printouts.
________________________________________________________________________________________________________________________________________
APPENDIXAPPENDIX CC
140
To Next Page
Loading...
Need help?
General