MODELMODEL 2500_______________________________________________________2500_______________________________________________________
ENTRY
EXPLANATION
-L-
LBSCALE LBSCALE provides for selecting the internal mass units
scaling factor. Selections indicate the scale by which the
mass units are divided. In other words, selecting X10
divides the mass units by 10; selecting x100 divides the
mass units by 100; X1000 divides the mass units by
1000, etc.
-M-
METERS METERS provide for selecting the number of meter
runs. Typical selections are ONE, which provides for one
meter run, TWO, which provides for two meter runs, etc.
-S-
SCFSCALE SCFSCALE provides for selecting the standard cubic foot
(SCF) volume units scaling factor. Selections indicate the
scale by which the volume in SCF is divided. In other
words, selecting X10 divides the volume in SCF by 10;
selecting X100 divides the volume in SCF by 100; X1000
divides the volume by 1000, etc.
STREAMID STREAMID provides for selecting one of several
possible product streams. Typical selection options are
ONE, TWO, THREE, etc., each of which selects the
stream indicated by the option.
________________________________________________________________________________________________________________________________________
APPENDIXAPPENDIX CC
141
To Next Page
Loading...
Need help?
General