____________________________________________________________________________________________________________ MODELMODEL 25002500
VARIABLE NAME
VARIABLE NAME DEFINITION
-P-
PIDGAIN PID control loop gain
PIDTGT Flow control target rate
PIDPVMAX PID loop process variable maximum value
PIDPVMIN PID loop process variable minimum value
PIDTR PID loop control integral gain in repeats per minute
PIPE# Pipe diameter, run #
PRESBASE Pressure base
PROVER Prover pulse input
PRVOLUME Prover volume
PT# Pressure transducer # (or run #)
PVLEFTI Rotate prover four-way valve left input
PVLEFTO Rotate prover four-way valve left output
PVMAX PID control loop maximum value for process variable
PVMIN PID control loop minimum value for process variable
PVRIGHTI Rotate prover four-way valve right input
PVRIGHTO Rotate prover four-way valve right output
-R-
REV Prover reverse launch
RESTART Number of restart cycles allowed
RHO Density
RHOB Density at base conditions
RHOB# Density at base conditions, run #
RHOF Density at flowing conditions
RHOF# Density at flowing conditions, run #
RSHEAT Specific heat ratio of process gas
RSHEAT# Specific heat ratio of process gas, run #
________________________________________________________________________________________________________________________________________
APPENDIXAPPENDIX AA
130
To Next Page
Loading...