____________________________________________________________________________________________________________ MODELMODEL 25002500
At the MAIN MENU, when the EDIT CONFIGURATION is selected and entered,
the following screen appears.
4. Highlight the desired COMMPORT selections with the arrow keys.
COMMPORT refers to the PC communications port used for serial data
transfer, which is Port 1 or Port 2.
5. After selecting the correct COMMPORT port press the ENTER key.
The reference screen at the bottom will indicate the selection. This reference
screen, which shows default entries, now indicates that the user will be loading the
Model 2500 on COM1. Other default entries on this reference screen indicate a
baud rate of 2400 with a COMMID of 1.
________________________________________________________________________________________________________________________________________
SECTIONSECTION 33
22
To Next Page
Loading...
Need help?
General