To Next Page

To Previous Page

MODELMODEL 2500_______________________________________________________2500_______________________________________________________

The SERIAL PORTS Lower Level Sub-Menus are as follows:

COMMID COMMID lower sub-menu provides a specific

communications address for the connected device. The

addresses allowed are 1-247 without zeros in front of the

one and two digit numbers. The default setting is 1.

COMMID2 (Two board units only) COMMID2 lower sub-menu

provides a specific communications address for the

connected device. The addresses allowed are 1-247

without zeros in front of the one and two digit numbers.

The default setting is 1.

BAUD1 BAUD1 lower level sub-menu provides for displaying or

changing the baud rate settings for serial port number 1.

The baud rate selections are 300, 1200, 2400, 4800, and

9600, with the default rate being 1200.

BAUD2 BAUD2 lower level sub-menu provides for displaying or

changing the baud rate settings for serial port number 2.

The baud rate selections are 300, 1200, 2400, 4800, and

9600, with the default rate being 2400.

BAUD3 (Two-board units only) BAUD3 lower level sub-menu

provides for displaying or changing the baud rate settings

for serial port number 3. The baud rate selections are

300, 1200, 2400, 4800, and 9600, with the default rate

being 1200.

________________________________________________________________________________________________________________________________________

SECTIONSECTION 44

DANIEL 2500 User Manual

Questions and Answers: