TECHNICAL FEATURES
167
7
7.2 DRAGON™ M
STD LR
Electrical and General Features
Battery Type 2 AA NiMh* batteries
Recharge Time 2 hours
Operating autonomy
(typ. continuous reading)
60,000 reads
Display
(Only available with some models)
LCD 4 lines x 16 chars
Programmable font and backlight
Indicators Laser On / battery low LED (red)
Good Read LED (green)
Programmable Beeper
Laser Features
Light Source VLD between 630~680 nm
Scan Rate 35 ± 5 scans/sec
Power (max) in mW 0.9 mW 1.4 mW
Scan Angle 42° 23°
PCS minimum
(Datalogic Test Chart)
15% 40%
Resolution maximum
mm
mils
0.08
3
0.25
10
Reading Field Width see reading diagrams (par. 7.6)
Laser Safety Class
(EN 60825-1 / CDRH)
2
Environmental Features
Working Temperature (°C) -10 to +40
Storage Temperature (°C) -20 to +50
Humidity 90% non condensing
Drop resistance (on concrete)
with display
without display
1.5 m
1.8 m
Protection sealed against rain and dust
Mechanical Features
Weight (without cable) about 340 g.
Dimensions 203 x 117 x 69 mm
Material ABS and Polycarbonate molded with rubber
* It is possible to employ also NiCd or non-chargeable Alkaline AA batteries.
To Next Page
Loading...
Need help?
General
