Datalogic Dragon - RS485 Network

Enter configuration
ik
ik
NETWORK PARAMETERS
Exit & Save configuration
i k
i k
59
RS485 NETWORK
 disable RS485 network
i3;k
i3;k
i3;k
enable RS485 Slave
i3;k
i3;k
i3;k
enable RS485 Master
i3;k
i3;k
i3;k
See par. 3.2 for details.
NOTE
If an OM-DRAGON™ cradle is errantly configured as a Slave but
not connected to a network, it may not be able to receive further
commands from the gun. In this case it can be reconfigured by
executing the bind procedure, which returns the cradle to Stand
Alone configuration.