Name: Datalogic Dragon
Brand: Datalogic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

DRAGON™

Read the OM-DRAGON™ restore default code:

Restore OM-DRAGON™ default

i39Rk

Read the desired Enable Network code.

Enable RS485 Master

i3;dk

Enable RS485 Slave

i3;_k

END of procedure.

For Host Master Network Layouts (see par. 3.2), The network configuration

parameters can be changed through STAR-Link™ software running on the PC.

Star-Link™ software can be downloaded for free from the Internet at the following

address:

www.datalogic.com/products

and follow the links : Portable Data Collection Terminals > Software Tools

For OM-DRAGON™ Master Network Layouts (see par. 3.2), The network

configuration parameters can be changed either through the DL Sm@rtSet™

configuration software running on the PC or by reading the barcode selections in the

Network section of this manual starting on page 58. If using configuration barcodes, it

is advised to completely configure the cradles before reconfiguring the DRAGON™

M reader (see below).

NOTE

After completing the OM-DRAGON™ cradle configuration and

connections in the network, you must reconfigure the DRAGON™

M reader using the STAR-System™ procedure in par. 4.5.

Datalogic Dragon User Manual

Questions and Answers: