Datalogic DS5100-X200 - Page 149

TECHNICAL FEATURES
133
9
PHYSICAL FEATURES
Standard Models
OM Models
Mechanical Dimensions
SER
85 x 101 x 42 mm (3.3 x 4 x 1.7 in)
124 x 117 x 48 mm (4.9 x 4.6 x 1.9 in)
ETH 0° and 90° connector positions
104 x 101 x 42 (4.1 x 4 x 1.7)
85 x 121 x 42 (3.3 x 4.8 x 1.7)
143 x 117 x 48 mm (5.6 x 4.6 x 1.9 in)
124 x 128 x 48 mm (4.9 x 5 x 1.9 in)
PNET 0° and 90° connector positions
105 x 118 x 42 (4.1 x 4.6 x 1.7)
102 x 121 x 42 (4 x 4.8 x 1.7)
143 x 126 x 48 mm (5.6 x 5 x 1.9 in)
140 x 129 x 48 mm (5.5 x 5.1 x 1.9 in)
Weight
SER
580 g (20.5 oz.) w/ cable
775 g (27.3 oz.) w/ cable
ETH
520 g (18.3 oz.)
715 g (25.2 oz.)
PNET
550 g (19.4 oz.)
745 g (26.3 oz.)
SOFTWARE FEATURES
READABLE CODES
*EAN/UPC (including Add-on 2 and Add-on 5)
*Code 93
*2/5 Interleaved
*Code 128
*Code 39 (Standard and Full ASCII)
*EAN 128
*Codabar
ISBT 128
ABC Codabar
Pharmacode
*GS1 DataBar
Plessey
*GS1 DataBar Expanded
GS1 DataBar Limited
* ACR4 Readable.
Code Selection
up to ten different symbologies during one reading phase
Decoding Safety
can enable multiple good reads of same code
Headers and Terminators
Up to 128-byte header string
Up to 128-byte terminator string
Operating Modes
On-Line, Serial On-Line, Verifier,
Automatic, Continuous, Test
Configuration Methods
X-PRESS Functions
Genius utility program
Genius based Host Mode Programming
Special Functions
Code Verifier
ACR4 (Advanced Code Reconstruction)
Motor Off and SW_Speed Control
Programmable Diagnostic and Statistic Messages
Parameter Storage
Non-volatile internal Flash
USER INTERFACE
LED Indicators
Ready, Good, Trigger, Com, Status, Power On
Multi-function Key
X-PRESS button
Display
2 lines x 16 characters
menu and diagnostic messages configurable in multi-language