Disconnect the power supply when opening the
device during maintenance or installation to avoid
exposure to hazardous laser light.
The laser diode used in this device is classified as a
class 3B laser product according to EN 60825-1
regulations and as a Class IIIb laser product
according to CDRH regulations.
Any violation of the optic parts in particular can
cause radiation up to the maximum level of the laser
diode (60 mW at 630 to 680 nm).
Warning and Device Class Labels
Produit(s) conforme selon 21CFR
1040.10 sauf des dérogations relatives
à la Laser Notice N° 50, date Juin 24,
2007.
Dans le paquet il y a l’étiquette(s) pour
les pays où le texte d'avertissement en
français sont obligatoires. Le(s) mettre
sur le produit à la place de la version
anglaise.
Exemple d'étiquettes d'avertissement laser
POWER SUPPLY
This product is intended to be installed by Qualified Personnel only.
This product is intended to be connected to a UL Listed or CSA Certified Power Unit marked
LPS or “Class 2”.
To Next Page
Loading...
