3.2 MECHANICAL INSTALLATION
DS5100 can be installed to operate in different positions. The four screw holes (M4 x 5mm
depth) on the body of the reader are for mechanical fixture to the L-shaped mounting
bracket.
There are also three screw holes (M5 x 5mm depth) for fixture to the U-shaped mounting
bracket.
The following diagrams give the overall dimensions of the scanner and mounting brackets
and may be used for installation. Refer to par. 3.2.1 and 3.4 for correct positioning.
Figure 15 – DS5100 Standard Serial Model Overall Dimensions
To Next Page
Loading...
