Datalogic MAGELLAN 8300 Product Reference Guide

IBM Features
Product Reference Guide 6-97
IBM Number of Host Resets
Specifies how many consecutive resets are processed before the scanner
starts a five-second period during which a user is allowed to enter label-
programming mode and configure the scanner.
To set the number of host resets:
1. Scan the SWITCH bar code.
2. Scan the bar code,
SET IBM NUMBER OF HOST RESETS. You’ll
need to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in
Appendix C that rep-
resent the desired number of host resets. The selectable range is 1-15
resets. Pad all single and double digit numbers with leading zeroes to
yield a three-digit entry (001-015).
Examples:
001 = 1 reset
005 = 5 resets
011= 11 resets
4. The scanner will automatically exit Programming Mode when the
appropriate amount of digits have been scanned
SET IBM NUMBER OF HOST RESETS

Datalogic MAGELLAN 8300 Specifications

General

Read rate (max)	3900 reads/s
Decoding standards	1D, GS1 DataBar
Standard interfaces	Keyboard Wedge, RS-232
USB 2.0 ports quantity	1
Input voltage	100 - 250 V
Product color	Metallic
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	102 mm
Width	292 mm
Height	130 mm