Datalogic MAGELLAN 8300 Product Reference Guide

A-2 Magellan
®
8300/8400
Controls and Indicators
The control panel consists of a green LED indicator, a Volume/Tone push
button and a Scale Zero push button/LED indicator as described in the
following pages. The unit also includes a beeper which can be configured
to sound indications of scanning, weighing, and deactivation activities.
LED and Beeper Indications
Scanner and Scale LEDs
The Scanner LED indicates scanner status, and the Scale LED (which is in
combination with the Scale push button) is primarily used to show scale
status (see
Tabl e A- 1).
NOTE
Since beeper indications are configurable, your unit may not be pro-
grammed to sound all the indications listed. For more information, see
Chapter 6, Programming in this manual.
Table A-1. Scanner and Scale LED Indications
LED
INDICATION
DURATION COMMENT
Scale at Zero
a
Scale (Yellow) LED on steady
The scale is at rest and reads zero weight. The
scale is ready to weigh.
Scanner Active
a
(Normal Mode)
Scanner (Green) LED on steady and
dim
The scanner is ready for operation. Scanning is
immediately available.
Good Read
Indication
a
Scanner (Green) LED - bright flash
Indicates a bar code has been read and decoded.
Program Mode
Indication
Scanner (Green) LED - Continuous
flashing
Indicates the scanner is in Label Programming
Mode. Cycle power to exit Programming Mode.

Datalogic MAGELLAN 8300 Specifications

General

Read rate (max)	3900 reads/s
Decoding standards	1D, GS1 DataBar
Standard interfaces	Keyboard Wedge, RS-232
USB 2.0 ports quantity	1
Input voltage	100 - 250 V
Product color	Metallic
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	102 mm
Width	292 mm
Height	130 mm