Datalogic MAGELLAN 8300 Product Reference Guide

Electrical Specifications
Product Reference Guide 1-11
Power Supply
Power Off the Terminal (P.O.T)
Certain units can receive power directly from the terminal (P.O.T.). A
USB adapter “brick” connects the scanner to IBM-USB 12V ports.
AC Adapter
Units which do not receive power directly from the terminal will use
either a Listed Class 2 or Listed LPS power source which supplies power
directly to the unit. When using such an AC Adapter, make sure to con-
nect using the correct IEC power cord for unique and international power
connections. If the cord will not plug into your AC power receptacle, the
power cord shipped is not compatible with your electrical system. Please
contact your distributor immediately to receive the necessary information
and components to ensure electrical compatibility.
NOTE
Power supplied from the terminal does not include auxiliary power for alterna-
tive scales.
VOLTAGE FREQUENCY PART NUMBER
100-240VAC ±10%
50-60 Hz
8-0858
CAUTION
Safe operation of your scanner or scanner/scale requires properly grounded
electrical outlets. Be sure to have a qualified electrician certify the earth-
ground connection on circuits which will be used to power the unit.
NOTE
The scanner is powered on/off by connecting/disconnecting it from its power
supply.

Datalogic MAGELLAN 8300 Specifications

General

Read rate (max)	3900 reads/s
Decoding standards	1D, GS1 DataBar
Standard interfaces	Keyboard Wedge, RS-232
USB 2.0 ports quantity	1
Input voltage	100 - 250 V
Product color	Metallic
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	102 mm
Width	292 mm
Height	130 mm