Datalogic MAGELLAN 8300 Product Reference Guide

6-142 Magellan
®
8300/8400
Single Cable Manufacturer Extensions
Enables/Disables manufacturer
1
extensions to the Single Cable RS-232
interface. These extensions communicate scale calibration information to
the host.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
SINGLE CABLE MANUFACTURER EXTENSIONS = DISABLE
SINGLE CABLE MANUFACTURER EXTENSIONS = ENABLE
1. The manufacturer of the scanner.

Datalogic MAGELLAN 8300 Specifications

General

Read rate (max)	3900 reads/s
Decoding standards	1D, GS1 DataBar
Standard interfaces	Keyboard Wedge, RS-232
USB 2.0 ports quantity	1
Input voltage	100 - 250 V
Product color	Metallic
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	102 mm
Width	292 mm
Height	130 mm