Datalogic Matrix 300N - X-PRESS Human Machine Interface; X-PRESS Functions

INTRODUCTION
47
2
2.5 X-PRESS HUMAN MACHINE INTERFACE
X-PRESS is the intuitive Human Machine Interface designed to improve ease of installation
and maintenance.
Status information is clearly presented by means of the five colored LEDs, whereas the
single push button gives immediate access to the following relevant functions:
 Test with bar graph visualization to check static reading
performance
 Aim/Autofocus to turn on the laser pointers to aid
positioning and focusing
 Setup to perform Exposure Time and Gain calibration
 Learn to self-detect and auto-configure for reading
unknown codes
2.5.1 X-PRESS Functions
Quick access to the following functions is provided by an easy procedure using the push
button:
1 – Press the button (the Status LED will give a visual feedback).
2 – Hold the button until the specific function LED is on (Test, Aim, Setup or Learn).
3 – Release the button to enter the specific function.
Once button is pressed, the cycle of LEDs activation is as follows:

Release button
to Exit

Release button
to enter Test Mode

Release button
to enter Aim/Autofocus Mode

Release button
to enter Setup Mode

Release button
to enter Learn Mode
 (cycle)
Release button
to Exit