Datalogic Matrix 300N Reference Manual

viii
LASER SAFETY
The Matrix 300N internal illuminators contain two aiming Laser LEDs used to position the
reader.
This product conforms to the applicable requirements of IEC 60825-1 and complies with 21
CFR 1040.10 except for deviations pursuant to Laser Notice N° 50, date June 24, 2007. This
product is classified as a Class 2 laser product according to IEC 60825-1 regulations.
WARNING: Use of controls or adjustments or performance of procedures
other than those specified herein may result in exposure to hazardous visible
laser light.
Disconnect the power supply when opening the device during maintenance or installation to
avoid exposure to hazardous laser light. The laser beam can be switched on or off through a
software command.
Produit(s) conforme selon 21CFR 1040.10
sauf des dérogations relatives à la Laser
Notice N° 50, date Juin 24, 2007.
Dans le paquet il y a l’étiquette(s) pour les
pays où le texte d'avertissement en
français sont obligatoires. Le(s) mettre sur
le produit à la place de la version
anglaise.
Matrix 300N Warning Labels
Exemple d'étiquettes d'avertissement laser
LED SAFETY
LED emission according to EN 62471.

Datalogic Matrix 300N Specifications

General

Type	Barcode module bar barcode readers
Sensor type	CMOS
Scanner type	1D/2D
Yaw reading angle	0 - 24 °
Optical sensor resolution	1024 pixels
Linear (1D) barcodes supported	-
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, MaxiCode, Micro QR Code, QR Code
Input voltage	10 - 30 V
Power consumption (typical)	5 W
Connectivity technology	Wired
Certification	AIM DPM, ISO/IEC 15415, ISO/IEC 15416, ISO/IEC 16022, ISO/IEC 18004, AS9132A
Product color	Blue, Metallic
Housing material	Aluminium, Plastic
International Protection (IP) code	IP67
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C

Weight and Dimensions

Depth	54 mm
Width	75 mm
Height	62 mm
Weight	238 g