2.4 BACKUP AND RESTORE THROUGH DL.CODE
DL.CODE allows Backup and Restore to be performed to/from the configuration PC via file or
to an external storage device such as BM100.
It can be performed for Stand Alone and Cluster (Master/Slave) configurations.
Backup and Restore functions allow performing Complete Configuration and Environment
parameter storage for Stand Alone and ID-NET (Master/Slave) network devices as well as
device firmware. Backup and Restore can be applied to any reader connected through a
device having external backup memory, regardless of the reader's network configuration.
Backup and Restore to external device is supported by DL.CODE for all reading devices
when connected to:
CBX + BM100
QLM-Series Gateways
NOTE: Before executing a Backup on a BM100 backup module make sure
the Write Protection switch is set to Unlocked.
To Next Page
Loading...
