Datalogic Matrix 300N - Main Serial Interface

INTRODUCTION
53
2
2.8.4 Ink-Jet Printing Technology
Figure 21 - Dot Matrix Code Directly Marked on PCB Copper Pad by Using Ink-Jet Technology
2.8.5 Laser Marking/Etching Technology
Figure 22 - Data Matrix Code Directly Marked on PCB Surface by Using Laser Etching Technology
CAUTION: If application codes must be read which are produced by Laser
Marking in real time, use Matrix 300N models incorporating YAG Filters in
order to avoid burning the CMOS sensor.