Enter/Exit Programming Mode
90
PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
UPC-E Check Character Transmission
Enable this option to transmit the check character along with UPC-E bar
code data.
UPC-E Check Character Transmission = Don’t Send
UPC-E Check Character Transmission = Send
DEFAULT
UPC-E 2D Component
This feature enables/disables a requirement that a 2D label component be
decoded when a base label for this symbology is decoded.
UPC-E 2D Component =
Disable (2D component not required)
UPC-E 2D Component =
2D component must be decoded
To Next Page
Loading...
