Datalogic PowerScan 9501-AR Series

Enter/Exit Programming Mode
Product Reference Guide 89
UPC-A 2D Component
This feature enables/disables a requirement that a 2D label component be
decoded when a base label of this symbology is decoded.
DEFAULT
EAN-13 2D Component =
Disable (2D component not required)
EAN-13 2D Component =
2D component must be decoded
UPC-E
The following options apply to the UPC-E symbology.
UPC-E Enable/Disable
When disabled, the reader will not read UPC-E bar codes.
UPC-E = Disable
UPC-E = Enable
DEFAULT