Datalogic PowerScan 9501-AR Series - Standard 2 of 5 Check Character Transmission; Standard 2 of 5 Length Control

Enter/Exit Programming Mode
132 PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
Standard 2 of 5 Check Character Transmission
This feature enables/disables transmission of an optional Standard 2 of 5
check character.
Standard 2 of 5 Check Character Transmission =
Don’t Send
Standard 2 of 5 Check Character Transmission = Send
DEFAULT
Standard 2 of 5 Length Control
This feature specifies either variable length decoding or fixed length decod-
ing for the Standard 2 of 5 symbology.
Variable Length: For variable length decoding, a minimum and maximum
length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
DEFAULT
Standard 2 of 5 Length Control = Variable Length
Standard 2 of 5 Length Control = Fixed Length