Enter/Exit Programming Mode
72
PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
LED AND BEEPER INDICATORS
Power On Alert
Disables or enables the indication (from the Beeper) that the reader is
receiving power.
Power On Alert = Disable (No Audible Indication)
Power On Alert = Power-up Beep
DEFAULT
Good Read: When to Indicate
This feature specifies when the reader will provide indication (beep and/or
flash its green LED) upon successfully reading a bar code.
DEFAULT
Indicate Good Read = After Decode
Indicate Good Read = After Transmit
Indicate Good Read =
After CTS goes inactive then active
To Next Page
Loading...
Need help?
General
