Datalogic PowerScan 9501-AR Series - Structured Append; Normal;Inverse Symbol Control

Enter/Exit Programming Mode 2D Global Features
178 PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
2D Structured Append
Enables/disables ability of reader to append multiple 2D Codes labels in a
structured format. The structured append property is globally applied to the
following symbologies, if these are enabled:
• Data Matrix
•Aztec
•QR Code
•PDF 417
DEFAULT
Structured Append = Disable
Structured Append = Enable
2D Normal/Inverse Symbol Control
Specifies the options available for decoding normal/negative printed 2D
symbols. This configuration item applies globally to all the 2D symbologies
that support that feature according to Standard AIM Specification: Data
Matrix, QR, MicroQR, Aztec and Chinese Sensible Code.
To decode all symbologies, including linear symbologies, refer to "Im
age
Capture" on page 80
Normal/Inverse Symbol Control = Normal
Normal/Inverse Symbol Control = Inverse
DEFAULT
Normal/Inverse Symbol Control =
Both Normal and Inverse
.