Datalogic PowerScan 9501-AR Series User Manual

Enter/Exit Programming Mode
Product Reference Guide 39
Disable Character
Specifies the value of the RS-232 host command used to disable the reader.
ASCII characters or any hex value fr
om 0 to 0xFF can be selected.
Setting to previously defined characters such as XON, XOFF, or host commands con-
flicts with normal operation of these characters.
See page 284 for more information on setting this feature.
Select Disable Character Setting
DEFAULT
0x44 = Disable Character is ‘D’

Datalogic PowerScan 9501-AR Series Specifications

General

Brand	Datalogic
Model	PowerScan 9501-AR Series
Category	Barcode Reader
Language	English