V0817, 1.6
Explanation of the main modes / navigation buttons
To make a new program and select a program out of the product
library.
To setup the machine and modify existing tool setups.
To create a new CNC-program or edit an existing CNC- program
numerically.
To start production of the selected program.
To program all settings for making one single bend, not related to a
program.
User settings and preferences applicable to the programming of
new programs. Also the required material properties can be
programmed in the Material library.
User settings and preferences applicable to the machine, tooling
library including the tool editor, backup/restore of data, software
version info etc.
To Next Page
Loading...
