Quality of Service (QoS) | 1189
• show cam layer2-qos
• show cam layer3-qos
• show qos class-map
• show qos policy-map
• show qos policy-map-input
• show qos policy-map-output
• show qos qos-policy-input
• show qos qos-policy-output
• show qos statistics
• show qos wred-profile
• test cam-usage
• threshold
• trust
• wred
• wred-profile
bandwidth-percentage
e
Assign a percentage of weight to class/queue.
Syntax
bandwidth-percentage percentage
To remove the bandwidth percentage, use the no bandwidth-percentage command.
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION (conf-qos-policy-out)
Command
History
Usage
Information
The unit of bandwidth percentage is 1%. A bandwidth percentage of 0 is allowed and will disable the
scheduling of that class. If the sum of the bandwidth percentages given to all eight classes exceeds
100%, the bandwidth percentage will automatically scale down to 100%.
Related
Commands
bandwidth-weight
c s
Assign a priority weight to a queue.
Syntax
bandwidth-weight weight
To remove the bandwidth weight, use the no bandwidth-weight command.
percentage
Enter the percentage assignment of weight to class/queue.
Range: 0 to 100% (granularity 1%)
Version 6.2.1.1 Introduced on E-Series
qos-policy-output Create a QoS output policy.
To Next Page