Dell Force10 TeraScale E Series - Page 1320

1320 | Security
www.dell.com | support.dell.com
Example
Figure 51-11. show ip ssh Command Example
Related
Commands
show ip ssh client-pub-keys
c e s
Display the client public keys used in host-based authentication.
Syntax
show ip ssh client-pub-keys
Defaults
No default behavior or values
Command Modes
EXEC
Command
History
Example
Figure 51-12. show ip ssh client-pub-keys Command Example
Usage
Information
This command displays the contents of the file flash://ADMIN_DIRssh/knownhosts
Related
Commands
show ip ssh rsa-authentication
c e s
Display the authorized-keys for the RSA authentication.
Syntax
show ip ssh rsa-authentication {my-authorized-keys}
FTOS#show ip ssh
SSH server : enabled.
SSH server version : v1 and v2.
Password Authentication : enabled.
Hostbased Authentication : disabled.
RSA Authentication : disabled.
Vty Encryption Remote IP
0 3DES 172.16.1.162
1 3DES 172.16.1.162
2 3DES 172.16.1.162
FTOS
ip ssh server Configure an SSH server.
show ip ssh client-pub-keys Display the client-public keys.
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
FTOS#show ip ssh client-pub-keys
poclab4,123.12.1.123 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAox/
QQp8xYhzOxn07yh4VGPAoUfgKoieTHO9G4sNV+ui+DWEc3cgYAcU5Lai1MU2ODrzhCwyDNp05tKBU3tReG1
o8AxLi6+S4hyEMqHzkzBFNVqHzpQc+Rs4p2urzV0F4pRKnaXdHf3Lk4D460HZRhhVrxqeNxPDpEnWIMPJi0
ds= ashwani@poclab4
FTOS#
ip ssh pub-key-file Configure the file name for the host-based authentication