Dell Force10 TeraScale E Series - Page 516

516 | FTOS Service Agent
www.dell.com | support.dell.com
Example
Figure 19-3. show debugging (FTSA) Command Example
Related
Commands
show keys
c e
Display the email encryption (PGP) keys. On E-Series chassis, this command is only supported for
TeraScale cards.
Syntax
show keys
Defaults
No default behavior or values
Command Mode
CONFIGURATION (conf-callhome)
Command
History
Example
Figure 19-4. show keys Command Example
Related
Commands
FTOS(conf-callhome)#show debugging
CALLHOME:
Callhome service debugging is on
FTOS(conf-callhome)#
debug call-home
Monitor FTSA email messages through the CLI.
Version 8.4.1.0 Added support to resolve domain names to IPv6 addresses.
Version 7.6.1.0 Introduced on C-Series
Version 6.3.1.0 Introduced for E-Series
FTOS(conf-callhome)#show keys
Type Bits KeyID Created Expires Algorithm Use
sec+ 768 0x64CE09D9 2005-06-27 ---------- RSA Sign & Encrypt
uid E000000003209
pub 1024 0xA8E48C2F 2004-12-08 ---------- DSS Sign & Encrypt
sub 1024 0xD832BB91 2004-12-08 ---------- Diffie-Hellman
uid Force10
2 matching keys found
FTOS(conf-callhome)#
call-home Start FTSA and Enter the FTSA mode.
encrypt Enable email encryption.
keyadd Add the server public key for encryption.