GARP VLAN Registration (GVRP) | 531
Command Modes
CONFIGURATION-GVRP
Command
History
Related
Commands
show garp timers
c e s
Display the GARP timer settings for sending GARP messages.
Syntax
show garp timers
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 20-1. show garp timers Command Example
Related
Commands
show gvrp
c e s
Display the GVRP configuration.
Syntax
show gvrp [brief | interface]
Version 7.6.1.0 Introduced on C, E, and S-Series
gvrp enable Enable GVRP on physical interfaces and LAGs.
protocol gvrp Access GVRP protocol.
Version 7.6.1.0 Introduced on C, E, and S-Series
FTOS#show garp timers
GARP Timers Value (milliseconds)
----------------------------------------
Join Timer 200
Leave Timer 600
LeaveAll Timer 10000
FTOS#
garp timers Set the intervals (in milliseconds) for sending GARP messages.
To Next Page
Loading...
