Dell Force10 TeraScale E Series - Page 64

64 | BOOT_USER Mode
www.dell.com | support.dell.com
Defaults
Not configured.
Command Modes
BOOT_USER
dir
c e
Display files in a directory
Syntax
dir file-url
Parameters
Defaults
Not configured.
Command Modes
BOOT_USER
Usage
Information
The maximum number of files allowed on an MMC card (internal or external flash) is 100 files.
Example
Figure 4-4. dir Command Example
enable
c e
Change the privilege level of user access to FTOS commands.
Syntax
enable {user | admin}
Parameters
Defaults
Not configured.
Command Modes
BOOT_USER
file-url
Enter the location keywords and information:
• For a file on the internal Flash, enter
flash:// followed by the filename.
• For a file on the external Flash, enter
slot0:// followed by the filename.
BOOT_USER # dir flash:
Displaying files in flash:
size date time name
-------- ------ ------ --------
8681647 MAR-21-2004 11:08:50 E1200-3.1.a3.78.bin
4905 MAR-17-2004 18:16:34 nimule
1182431 FEB-29-2004 22:08:14 dohuk
8807825 MAR-30-2004 12:49:14 E1200-3.1.0.309.bin
1182431 FEB-24-2004 22:52:00 t1
14729 MAR-14-2004 17:55:26 erbil
1182431 MAR-10-2004 10:57:30 vW
6858 MAR-07-2004 09:52:58 RPM0CP1
1182431 MAR-22-2004 12:17:34 tunis
7819238 MAR-22-2004 12:23:14 E1200-3.1.0.316.bin
8989646 MAR-17-2004 15:13:06 E1200-3.1.0.390.bin.dos2
14517 MAR-30-2004 09:48:44 RPM0CPlog1
14506 MAR-30-2004 09:49:34 RPM0CPlog2
BOOT_USER #
admin
Used only by Dell Force10 TAC personnel.
user
Used only by Dell Force10 TAC personnel.