Dell Networking 7048 User Manual

Managing IPv4 and IPv6 Multicast 1207
Figure 42-43. Add Static RP
3 Enter the IP address of the RP for the group range.
4 Enter the group address of the RP.
5 Enter the group mask of the RP.
6 Check the Override option to configure the static RP to override the
dynamic (candidate) RPs learned for same group ranges.
7 Click Apply .
The new Static RP is added, and the device is updated.

Dell Networking 7048 Specifications

General

Brand	Dell
Model	Networking 7048
Category	Switch
Language	English