Dell Networking 7048 - OSPF Configuration Examples; Configuring an OSPF Border Router and Setting Interface Costs

Configuring OSPF and OSPFv3 997
OSPF Configuration Examples
This section contains the following examples:
• Configuring an OSPF Border Router and Setting Interface Costs
• Configuring Stub and NSSA Areas for OSPF and OSPFv3
• Configuring a Virtual Link for OSPF and OSPFv3
Configuring an OSPF Border Router and Setting Interface Costs
This example shows how to configure the PowerConnect switch as an OSPF
border router. The commands in this example configure the areas and
interfaces on Border Router A shown in Figure 34-35.
Figure 34-35. OSPF Area Border Router
Area 2 Area 3
Area 0
Backbone
Area Internal
Router
Border Router
A
Border Router
B
VLAN 70
192.150.2.2
VLAN 50
192.150.2.1
VLAN 80
192.150.3.1
VLAN 90
192.150.4.1