Dell Networking 7048 - Mrouter Status

Configuring L2 Multicast Features 719
Removing a Bridge Multicast Group
To delete a bridge multicast group:
1
Open the Bridge Multicast Group page.
2 Select the VLAN ID associated with the bridge multicast group to be
removed from the drop-down menu.
The
Bridge Multicast Address and the assigned ports/LAGs display.
3 Check the Remove check box.
4 Click Apply .
The selected bridge multicast group is removed, and the device is updated.
MRouter Status
Use the MRouter Status page to display the status of dynamically learned
multicast router interfaces.
To access this page, click Switching
→ Multicast Support → MRouter Status
in the navigation panel.
Figure 25-4. MRouter Status