Dell Networking 7048 - Configuring Dot1 Ag (Web); Dot1 Ag Global Configuration; Dot1 Ag MD Configuration

Configuring Connectivity Fault Management 767
Configuring Dot1ag (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring Dot1ag features on a
PowerConnect 7000 Series switch. For details about the fields on a page, click
at the top of the page.
Dot1ag Global Configuration
Use the Global Configuration page to enable and disable the Dot1ag admin
mode and to configure the time after which inactive RMEP messages are
removed from the MEP database.
To display the
page, click Switching → Dot1ag → Global Configuration in
the tree view.
Figure 26-4. Dot1ag Global Configuration
Dot1ag MD Configuration
Use the MD Configuration page to configure maintenance domain levels
and names.
To display the
page, click Switching → Dot1ag → MD Configuration in the
tree view.