Configuring VLANs 623
6.
Configure the MAC-based VLAN information.
The following commands show how to associate a system with a MAC
address of 00:1C:23:55:E9:8B with VLAN 300. Repeat the
vlan association
mac
command to associate additional MAC addresses with VLAN 300.
console(config)#vlan database
console(config-vlan)#vlan association mac
00:1C:23:55:E9:8B 300
console(config-vlan)#exit
console(config)#exit
7.
To save the configuration so that it persists across a system reset, use the
following command:
console#copy running-config startup-config
8.
View the VLAN settings.
console#show vlan
9.
View the VLAN membership information for a port.
console#show interfaces switchport gi1/0/1
Port: Gi1/0/1
VLAN Membership mode:Trunk Mode
Operating parameters:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: VLAN Only
Default Priority: 0
GVRP status:Disabled
VLAN Name Ports Type Authorization
----- --------- ------------ --------- -------------
1 Default Po1-48,
gi1/0/2-15,
gi1/0/21-24
te1/1/1-2
Default Required
200 Marketing gi1/0/1,
gi1/0/16-20
Static Required
300 Sales gi1/0/1 Static Required
400 Payroll gi1/0/1-15 Static Required
To Next Page
Loading...
