Dell Networking 7048 - Page 866

866 Configuring DHCP Server Settings
Figure 31-6. Add Network Pool
The Engineering pool also configures clients to use 192.168.5.1 as the
default gateway IP address and 192.168.1.5 and 192.168.2.5 as the primary
and secondary DNS servers.
4 Click Apply .
Adding a Static Pool
To create and configure a static pool of IP addresses:
1
Open the Address Pool page.
2 Click Add Static Pool to display the Add Static Pool page.
3 Assign a name to the pool and complete the desired fields.
NOTE: The IP address 192.168.5.1 should be added to the global list of
excluded addresses so that it is not leased to a client.