Dell PowerEdge C6220 II - ISCSI Remote Boot

104 | Using the System Setup Program
ISCSI Remote Boot
Option
Description
iSCSI Initiator Name
The worldwide unique name if the initiator. Only
iqn. Format is accepted.
Enable DHCP
(Disabled default)
Disables/Enables DHCP.
Initiator IP Address
Initiator Subnet Mask Gateway
Enters IP address in dotted-decimal notation.
Target IP
Target IP Address
Target Port
Boot LUN
Targets Name
Enters IP address in dotted-decimal notation
Targets Port
Hexadecimal representation of LU number
CHAP Type
(None default)
None, one way CHAP or mutual CHAP.