Dell PowerEdge C6220 II - Cable Routing for Onboard SATA Cables (1 U Node)

Removing and Installing System Components | 249
Cable Routing for Onboard SATA Cables (1U Node)
1 Connect the onboard SATA cables to the system board, and connect
the other end of the cable to the corresponding connectors on the
system board. See Figure 3-68.
Figure 3-68. Cable Routing for Onboard SATA Cables (1U Node)
Item
Cable
From
(System Board)
To
(System Board)
Onboard
SATA
cable
Onboard SATA
output connector 0
SAS/SATA input
connector 0
Onboard
SATA
cable
Onboard SATA
connectors 4&5
SAS/SATA input
connectors 4&5