Dell PowerEdge C6220 II User Manual

Using the System Setup Program | 111
Server Menu
This page enables you to configure Server parameters.
Scroll to this item and press Enter to view the following screen:
Option
Description
Status of BMC
Displays the BMC status.
IPMI Specification Version
Displays the IPMI specification version.
BMC Firmware Version
Displays the BMC firmware version.
NIC1 MAC Address
Displays the NIC1 MAC address.
NIC2 MAC Address
Displays the NIC2 MAC address.
ACPI SPMI Table
(Enabled default)
Disabled – Disables the ACPI SPMI Table for BMC
ROM update.
Enabled – Enables the ACPI SPMI Table for IPMI

Dell PowerEdge C6220 II Specifications

General

Form Factor	2U Rack
Processor	Intel Xeon E5-2600 v2 series
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi
Memory	Up to 512GB DDR3 per node
Storage	Up to 24 x 2.5" hot-plug SAS, SATA, or SSD drives
Network	Dual 1GbE, optional 10GbE
Management	Dell Remote Access Controller (iDRAC7) with Lifecycle Controller
Number of Processors	Up to 2 per node (4 total in 2U chassis)
Power Supply	Redundant hot-plug power supplies