Dell PowerEdge C6220 II - Page 112

112 | Using the System Setup Program
Option
Description
driver installation.
Set BMC LAN Configuration
Inputs for Set LAN Configuration command. Each
item in this group may take considerable amount of
time.
Remote Access
Configuration
Configures Remote Access.
Restore on AC Power Loss
(Power On default)
Power Off - After an AC power loss, when AC power is
restored, the system will stay off.
Power On - After an AC power loss, when AC power is
restored, the system will power on.
Last State - After an AC power loss, when AC power is
restored, the system will return to the state which is
when power was lost.
Power Staggering AC
Recovery
(Immediate default)
Sets the Power Staggering AC Recovery time to
immediate/Random/User Defined mode.
Power Button
(Enabled default)
Enabled - Default, Enables Power Button to turn off
system.
Disabled - Disables Power Button to turn off system.
View System Event Log
Views all events in the BMC and BIOS event Log.
Event Logging
(Enabled default)
Disables/Enables BIOS to log system events to BMC,
errors include ECC/ PCI/ PCI-E/ HT…etc.
NMI on Error
(Enabled default)
Disables/Enables BIOS to generate NMI when PCI-E
uncorrectable errors occur.