Removing and Installing System Components | 167
3 Press the release lever and using the handle, slide the power supply out
of the system. See Figure 3-13.
NOTE: Removing the power supply may require considerable force.
Figure 3-13. Removing and Installing a Power Supply
Installing a Power Supply
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
CAUTION: The System requires at least one power supply to operate normally.
1 Verify that both power supplies are of the same type and have the same
maximum output power.
NOTE: The maximum output power is printed on the power supply label.
To Next Page
Loading...
