Dell PowerEdge C6220 II - Page 124

124 | Using the System Setup Program
Token
Setup option
Description
01DB
Embedded NIC2
Enables NIC2 with iSCSI Remote Boot.
01EA
Tu rbo Mode
Disables Intel's processor allows the processor core to
increase its frequency.
01EB
Tu rbo Mode
Enables Intel's processor allows the processor core to
increase its frequency.
01F0
Embedded NIC3
Disables the system’s third embedded network interface
controller.
01F1
Embedded NIC3
Enables the system ’ s third embedded network interface
controller, but don’t enable the NIC ’ s
associated PXE or
RPL boot-ROM.
01F2
Embedded NIC3
Enables the system ’ s third embedded network interface
controller (full-function), including its
PXE boot-ROM.
01F3
Embedded NIC3
Enables NIC3 with iSCSI Remote Boot.
0204
VT for Direct I/O
Disables Intel Virtualization Technology for Direct I/O
(VT-d) that enhances I/O support (DMA) when running a
Virtual Machine Monitor.
0205
VT for Direct I/O
Enables Intel Virtualization Technology for Direct I/O
(VT-d) that enhances I/O support (DMA) when running
a Virtual Machine Monitor.
0211
Internal USB
PORT
This field disables the internal USB port.
0212
Internal USB
PORT
This field enables the internal USB port.
021F
Maximum
Performance
This will set the Maximum Performance mode in the
system.
0221
OS Control
Allows OS to change the P-state.
0224
Embedded
Video Controller
The embedded video controller is enabled, and it is the
primary video device.
0225
Embedded
Video Controller
The embedded video controller is disabled.
022D
Boot Mode
Enables booting to Unified Extensible Firmware Interface
(UEFI) capable operating systems.