Using the System Setup Program | 127
Disables DRAM references from triggering DRAM
prefetch requests.
Tu rns on the DRAM prefetch unit in the Northbridge.
HW Prefetch
Training on SW
Disables hardware prefetcher from considering software
prefetches when detecting strides for prefetch requests.
HW Prefetch
Training on SW
Enables Hardware prefetcher considers software prefetches
when detecting strides for prefetch requests. (default)
Enables BIOS support for SRIOV devices.
Disables BIOS support for SRIOV devices.
Indicates all DIMMs in the system are operating at 1.5
volts.
Indicates all DIMMs in the system are operating at 1.35
volts.
This setting indicates the memory operating voltage will
be set automatically by the Memory initialization code
and depends upon the installed DIMM's capability and
the memory configuration of the system. This is the
default setting and will set the Memory Operating voltage
to the POR voltage.
This field enables (Default) the DCU Streamer Prefetcher.
This field disables the DCU Streamer Prefetcher.
Sets to enable (Default) for HPC applications.
To Next Page
Loading...
